Conair Steamer How To Fill Water

Ezoic

CONAIR GS88 Textile Steamer

Of import SAFETY INSTRUCTIONS

When using electric appliances, espe-cially when children are present, basic safety precautions should always be taken, including the post-obit:
READ ALL INSTRUCTIONS BEFORE USING
DANGER – Any appliance is electri-cally live even when the switch is off.
To reduce the chance of expiry past electric shock:

Always unplug apparatus immediately subsequently using.
Practise not place or shop appliance where it tin can fall or be pulled into a tub or sink.
Exercise not immerse the appliance in water or other liquids.
If an apparatus falls into water, unplug it immediately. Practice not attain into the water.

Alert – To reduce the risk of burns, electrocution, fire, or injury to persons:

This appliance should never be left unattended when plugged in.
This appliance should not be used by, on, or well-nigh children or individuals with certain disabilities. Unsupervised utilize could result in fire or personal injury.
Use this appliance only for its intended use every bit described in this manual. Do not use attachments non recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it is non working properly, or if information technology has been dropped or dam-aged, or dropped into h2o. To reduce the take chances of electric shock, do not disassemble or do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or inju-ry to persons when the appliance is used. Return the appliance to an authorized ser-vice center for exam and repair.
Continue the cord away from heated surfaces. Do not allow cord to bear upon heated surfaces. Do not pull or twist cord. Let appliance absurd completely before putting away.
To reduce the gamble of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a prophylactic characteristic, this plug will fit into a polarized outlet only one mode. If the plug does not fully fit in the outlet, reverse the plug and attempt over again. If information technology even so does non fit, contact a licensed electrician to install the proper outlet. Do not change the plug in whatever fashion.
Never drop or insert whatever object into any opening or hose.
Practice not use outdoors or operate where aerosol (spray) products are being used or where oxygen is existence administered.
Practice non utilize an extension cord to operate apparatus.
Surfaces of this appliance may be hot when in employ. Do non allow heated surfaces impact eyes or skin.
Practise not identify the steam nozzle direct on any surface or on the appliance power cord while information technology is hot or plugged in. Use the stand provided.
Unplug this appliance before filling or emptying water tank and when not in use. Do not overfill.
While emitting steam, this appliance may cause burns if it is used besides close to the skin, scalp or eyes, or if it is used incorrectly. To reduce the risk of contact with hot h2o discharging from steam vents, test appliance before each use by belongings information technology abroad from the trunk.
Do not operate steamer without properly filling the water tank with distilled water.
Always keep the hose and nozzle elevated above the water tank.
Never yank string to disconnect from outlet. Instead, grasp plug and pull to disconnect.
Burns could occur from touching hot metal parts, hot water, or steam. Use care when removing water tank or when yous plough a steam appliance upside downwards – there may be hot water in reservoir.
To reduce likelihood of circuit overload, do not operate another loftier-wattage apparatus on the same circuit at the same time.
If an extension cord is absolutely necessary, a 15 ampererated cord should be used. Cords rated for less amperage may overheat. Care should exist taken to adapt the cord so that it cannot be pulled or tripped over.
Always remove the water tank from the appliance earlier filling information technology with distilled water.
When changing attachments, please be certain the unit is off and no steam is being released, in order to avoid contact with hot water.
Use caution when changing attachments, as there may exist hot water from condensation. Ensure the attachments are dry out or cooled off, to avoid contact with hot water.
Never steam dress that y'all or someone else are wearing.
Exercise not hold hand in front of steam.
First test unit of measurement on an inconspicuous area of the item to exist steamed to ensure fabric tin tol-erate the effects of steam. If there is no evidence of damage, y'all can proceed to employ the steamer on that detail.
When steaming, always go on the unit in motion and about one inch from the surface of the item being steamed to avoid potential dam-age. Do not continuously hold steamer over an area or touch steamer jets straight to material every bit this can cause impairment, including shrinkage, melting, or colour shift to certain types of cloth. 27. In the case of heavier, durable fabrics such equally wool coats or bedding, slower passes with the steamer may be necessary to achieve desired results. As always, start past testing on an inconspicuous expanse of the detail to be steamed to ensure fabric can tolerate the effects of steam and adapt your technique as needed to obtain the results desired.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

UNPACKING INSTRUCTIONS

Place the box on a large, sturdy, flat surface. Carefully remove the apparatus from the packing material. Proceed all plastic numberless away from children. Some assembly required.

STEAMER Assembly

Attaching the Telescopic Pole and Rotating Hanger

Remove the thumb screw from the bottom of the telescopic pole.
Insert the telescopic pole into the open up-ing on the back of the steamer. Press down firmly to ensure the pole has reached the lesser. Supersede the screw securing the pole to the base of the garment steamer.
Fully extend the telescopic pole, making sure to lock the pole upright by engaging the 2 clips.
Place hanger associates atop the pole, and hang the steam nozzle from the cradle.
Hang your garment in preparation for steaming abroad wrinkles. The hanger rotates 360 degrees. Plough the hanger as you wish during steaming.
When you are set up to steam, fill the water tank from the top opening with dis-tilled h2o. Annotation: Practise not open the bottom cap as this is used for cleaning or removing backlog water only.
Plug the steamer unit into a standard 120V AC power outlet.
The bristle brush and soft absorber brush attachments easily snap over the soleplate for use. We recommend using the soft cushion brush attachment when steaming frail fabrics. Come across educational activity booklet "Attachments" section.

GET TO KNOW YOUR STEAMER

TURNING STEAMER ON

Remove water tank from base, fill with distilled water, and PRESS tank down into the main unit.
Press the human foot activated power switch once to turn the unit ON.
While water is heating, the green light volition blink.
Once the green lite is steady, the unit of measurement is ready to apply.
Printing the trigger switch on the steam head to release steam (A).
For continuous high-velocity steam, employ the trigger lock (A).
The rotary switch on the steam head allows user to select the steam manner desired.
Annotation: The first setting emits steam through the soleplate, while the 2d setting emits steam from the top as well equally the sides. You tin can adjust the amount of steam coming out on the sides by turning the dial more than toward the multidirectional steam setting or more toward the unidirectional setting.
When water level is low, an audio alert will sound. Refill the h2o tank at this fourth dimension to continue using the steamer.
Press the foot activated ability switch again to turn the unit of measurement OFF.

USING PANTS CLIP SYSTEM

This cloth steamer is equipped with a pants clip system for holding pants taut for faster and more than constructive steaming.
You may apply the 2 summit pants clips which are attached to the hanger to secure the top of your garment.

The bottom clips tin can be adapted by pulling them upwards to reach the bottom of the pants you are steaming.

Delight notation: Some pants may be too long to use the bottom clips. If that is the instance, simply utilize the top clips and permit your pants hang freely.

USING THE Congenital-IN CREASER

This material steamer is equipped with a congenital-in creaser. In one case the steamer has been gear up upwards and turned ON according to the instructions, follow these steps for sharp creases in your garment:

Move selector switch to the 3-directional steam setting on nozzle.
Agree sleeve or pants leg by the cuff and slide nozzle over the fab-ric. Position fabric fully within the creaser opening on the nozzle head.
Plough the nozzle 90 degrees and then the cloth is taut and ensure that the crease is positioned properly. Circumspection, steam will exit from both sides of the nozzle.
While maintaining the tension on the fabric, run the nozzle upwards and down the garment, assuasive the steam and tension to create the desired crease.

OPERATING INSTRUCTIONS

FILLING THE H2o TANK (PRIOR TO PLUGGING IN THE Apparatus)

Remove the water tank using handle on top of tank. Fill reservoir using opening on meridian of tank with distilled water until it is filled to the desired level. Do not overfill. Position the water tank on the base and make sure it is seated properly in the unit.

Practice NOT Fill up THE TANK WITH HOT WATER

Do not unscrew the bottom cap unless for cleaning (Fig. 4). Notation: Be certain to always empty or make full the tank over a sink, existence conscientious not to spill h2o from small opening on the acme of the tank.

ATTACHMENTS

The bristle castor and soft cushion brush attachments hands snap over the soleplate. Make sure your steamer is off and has cooled before calculation or removing attachments.

CLEANING AND STORING

Plough the ON/OFF switch to the OFF posi-tion and unplug from the power source.
Wait for the steamer to cool completely for at to the lowest degree 30 minutes.
Remove the water tank from unit, open up bottom cover and empty unused contents. Let to air dry.
Collapse telescopic hanger pole.
Replace water tank.
Store the unit of measurement.

DECALCIFICATION

If the apparatus begins to produce steam more slowly than usual or stops producing steam and so starts again, you may need to decalcify your steamer. Decalcification refers to removing the calcium deposits that form over time on the metal parts of the steamer. For best performance from the steamer, decalcify the unit of measurement once a month. The fre-quency depends upon how often y'all use the steamer.

To decalcify, add a solution of 1/3 white vinegar and 2/3 distilled h2o in the h2o tank. Place the water tank in the unit of measurement. Plug the unit of measurement into electrical outlet. Turn to the ON position and run until half the amount has steamed (i liter). Turn the unit of measurement to the OFF position, unplug from electrical outlet, and permit to sit for 30 minutes.

Repeat the to a higher place process as many times as necessary until a normal steam charge per unit returns, ordinarily 2–three times. With each repeat-ed cycle, use a fresh solution of vinegar and distilled water. Run ane cycle of fresh, dis-tilled water without vinegar through the unit at the completion of decalcification earlier using the unit of measurement over again to steam garments.

HOW TO STEAM

Grasp the handle of the steam nozzle with the soleplate facing away from you. Brainstorm at the lesser of the fabric to allow the steam to rise inside and outside, removing wrinkles. Slowly move the nozzle from the bottom to the top of the fabric. Some fabrics are best steamed on the underside of the material. This will let the fibers of the fabric to relax, eliminating wrinkles. Try the multidirectional steam setting for apply inside garments, to freshen and help eliminate odors. Use the soleplate to help remove wrinkles in thicker, heavier and less frail fabrics. Utilize the soleplate on an ironing board or a similar surface.
Annotation: Examination fabric for color fastness in an inconspicuous spot. Curtain linens, towels, handkerchiefs, and napkins over a rod or place on a towel rack. Heavier fabrics may require repeated steaming. Repeat as necessary.

With do, yous will gain speed and efficiency. You will soon learn which fabrics require multiple steam applications.

Do not directly touch velvet, silk or other delicate fabrics with the steam head. Apply extra caution when steaming fragile fabrics.
E'er steam with hose in upright position, so any condensation is free to flow dorsum into the steamer reservoir on the base.

If you steam in a depression position, condensation will collect inside the hose. To avoid this, lift the steam handle upwardly until the hose is extended to its total height.

TO STEAM DRAPES

Launder and dry out drapes as directed, according to fabric blazon. Rehang drapes and steam when they are in place.

Caution: Soleplate will be hot when in use. Avoid prolonged contact. Keep steam head moving while steaming your garment.

TROUBLESHOOTING THE STEAMER

Problem – Steamer fails to heat
CAUSE – Steamer not plugged in
SOLUTION – Plug into electrical outlet
PROBLEM – No steam
CAUSE – Water level is low (beep will sound)
SOLUTION – Turn ON/OFF switch off and refill water tank
Trouble – Water drips from nozzle
Crusade – Condensation in hose
SOLUTION – Concord the hose vertically and allow water to bleed back into unit
Trouble – Poor steam performance
Crusade – Sediment in tank
SOLUTION – Decalcify reservoir and water tank. Run across decalcification instructions
PROBLEM – Dye on steam nozzle
Cause – Fabric not colorfast / Touching steam nozzle to fabric
SOLUTION – Motion steam nozzle 1/2 inch abroad from textile during utilise. Clean steam nozzle with household cleaner and rinse with water
Problem – Discoloring of fabric
Cause – Dye on surface of fabric needs special handling and cleaning / Fabric not suitable for steaming
SOLUTION – Some custom specialty fabrics take dyes that are Not COLORFAST and are not suitable for steaming. Test fabric for colorfastness in an inconspicuous spot before steaming

NOTE: Amounts of chemicals in water will vary in different areas. To ensure continued operation of the steamer, use only distilled water. Never shop without cleaning and removing excess water from the reservoir and water tank.

Express ONE-YEAR WARRANTY

Conair will repair or replace (at our option) your unit gratuitous of charge for 12 months from the date of purchase if the appliance is lacking in workmanship or materials.
To obtain service under this warranty, return the defective product to the service eye listed, together with your purchase receipt and $five.00 for postage and handling. California residents need only provide proof of purchase and should telephone call 1-800-3-CONAIR for shipping instructions. In the absenteeism of a buy receipt, the warranty catamenia shall exist 12 months from the appointment of industry.
Any Unsaid WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND Fitness FOR A Item PURPOSE, SHALL Be LIMITED IN DURATION TO THE 12-MONTH DURATION OF THIS WRITTEN, Limited WARRANTY. Some states do not let limitations on how long an implied warranty lasts, so the above limitations may not utilise to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL Amercement FOR Breach OF THIS OR ANY OTHER WARRANTY, Limited OR IMPLIED, Whatsoever. Some states do non allow the exclusion or limitation of special, incidental, or conse-quential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also accept other rights, which vary from land to country.

Please annals this product at: www.conair.com/registration
Service Heart

Conair Corporation
Service Section
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

For information on any Conair production call: 1-800-3-CONAIR or visit us on the web at www.conair.com
©2015 Conair Corporation
East Windsor, NJ 08520/Glendale, AZ 85307

Documents / Resources

Source: https://manuals.plus/conair/gs88-fabric-steamer-manual